Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω U-Tech coil, the PockeX is a sub-ohm device designed for mouth-to-lung use. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.

The device has a 2ml tank built into the unit which is leak resistant and very easy to fill and use. Available in 6 attractive colours.

The airflow is set in place to give the perfect draw required for these coils.

If you need a stealthy sidekick to your current setup or are just starting out then look no further than the Pockex!

The latest and greatest kit from Aspire, combining the brand new top/side-filling Cleito Pro with the boldy-designed Puxos mod.
The Cleito Pro is compatible with standard Cleito coils, and the kit includes a 21700 size battery as well as an 18650 adapter for ultimate convenience.

Fires up to 80W and includes all the amazing features that you'd expect from an Aspire box mod, such as Wattage, Voltage, Bypass, CPS (C1/C2/C3) , TC and TCR modes.

Available in 6 designs. Please note that the design codes may vary from other information online. Please see the list below and the pictures on this page for clarification - if you're not sure then please contact us for help.

P1: Camo

P2: Swirl

P3: Splash

P4: Glam

P5: Jazz

P6: Deco

Whats in the box?

1 x Puxos mod
1 x Cleito PRO Tank
2 x Cleito PRO 0.5ohm Coils.
6 x 0-rings
1 x 21700 Battery.
1 x USB Cable.
1 x 18650 Adapter

Compatible with the Aspire BP series

RECOMMENDED WATTAGE

0.17 ohm - 45W to 55W

0.3 ohm - 30W to 40W

0.6 ohm - 15W to 25W

1.0 ohm - 10W to 16W

Suitable for both mouth-to-lung and direct inhale depending on whether you're using the 0.4ohm or the 1.2 ohm coil, it features a very adjustable airflow system that matches both styles perfectly. The Tigon utilises a brand new push fit system that not only makes it quicker to replace the coil but because of its automatically closing juice port, you can change the coil even if the tank is full of your favourite juice. The Tigon also comes with a wide bore drip tip for sub-ohm vaping and a longer, thinner drip tip for MTL users included. The 1800mAh battery is simple to use and tells you how much charge is left by lighting up the button different colours.

In The Box

1 x Aspire Tigon Mod/Battery (1800mAh)

1 x Aspire Tigon Tank

1 x Tigon Coil 0.4 Ohm - 23-28w Direct Inhale (Pre-installed)

1 x Tigon Coil  1.2 Ohm - 10-12w Mouth to Lung

2 x Drip tip, Wide Bore and Mouth to Lung (Standard 510)

1 x Micro USB Cable

1 x Spares

Features

Built In 1800mAh Battery

Able to change the coil with juice still in the tank

Suitable for both mouth to lung and direct inhale

Adjustable airflow collar at the base.

Push fit coil system

Retracting slide top filling system

Micro USB Charging Port

How to fill

Lift the top collar of the tank until it stops and then slide away from the direction arrow.

The 1000mAh battery capacity strikes the ideal balance between power and performance, with a fixed wattage output delivering a consistent MTL (Mouth To Lung) vape. The ergonomic, pocket-friendly design of the Slym, as well as a simple single button operation, offers an ideal kit for vaping on the go. A bypass output provides a long-lasting battery, matching the power output with the amount of charge remaining. A range of safety protections including short circuit, low voltage and an automatic cutoff allows for a secure vaping experience.

The refillable Slym pods are filled via the top fill system, by lifting the plastic flap and filling one of the two juice ports with any e-liquid of your choice. A 1.2 Ohm NiChrome coil provides a fast ramp up with enhanced flavour, recommended to be paired with high PG e-liquids of 50% and above.

Features:

Refillable Pod Kit

1000mAh Built-In Battery

Mouth-to-lung Inhale

Fixed Wattage Output

Sleek Pen Style Design

Bypass Output Wattage

Range Of Safety Protections

Single Button Operation

1.8ml E-Liquid Capacity

1.2 Ohm Coil Resistance

Top Fill System

Contents:

Aspire Slym 1000mAh Pod Device

Aspire Slym 1.8ml Refillable Pod

Micro USB Charging Cable

User Manual

The Aspire Rover 2 kit offers a new level of vaping comfort in the palm of your hand. With a 2200mAh built-in battery delivering up to 40W of power, the Rover 2 is ideal for new and existing vapers who need something compact, without sacrificing performance.

The NX40 mod can be adjusted between VV, VW and Bypass in order to tailor the vaping experience to personal preference, whilst the host of integrated protection features such as automatic cut off, short circuit and overheat will keep you vaping safe. The Rover 2 also comes with USB-C for fast and efficient charging, meaning less time charging and more time vaping.

The Rover 2 kit comes complete with the stylish Nautilus XS tank, which retains the universally popular Nautilus X coils to deliver a perfected MTL or DL draw. A fully adjustable airflow is located at the top of the tank, and the top fill system makes refilling while on the go simple. The Nautilus XS also uses a radial fin heat sink design, which helps keep the tank cool when vaping, and prevents the e-liquid flavour from degrading through usage.

The Nautilus XS coils are easily changed by unscrewing the top cap, removing the old coil and installing a new one. The 0.7ohm mesh DL coil can produce clouds of flavourful vapour, with the 1.8ohm MTL providing a more refined experience, especially if used with nic salt vape liquid.

The Aspire Rover 2 would be ideal for new vapers who are looking for a high-quality introduction to vaping, or for existing vapers that want to upgrade to the improved Nautilus XS tank for all their MTL / DL vaping needs.

This kind of coils has never been seen before in a mainstream tank. The coil surface area is huge which brings wicking and flavour production to a whole new level.

If you have tried a stove-top style coil before and you're worried about vapour production then don't be. Whilst it's not designed to be a cloud machine it certainly does the job perfectly well.

The ohm rating of the coil is between 0.10ohm and 0.16ohm, so why the variation? Due to the nature of the coil, each one will never read exactly the same depending on certain variables.

Changing the coil is also super easy. Simply remove the mouthpiece/top cap, and unscrew the mounted splash protector locking the coil down. Discard the older coil and place the new coil over the filling tube making sure all sides of the coil sit flush to the body of the tank. Now replace the splash protector and lock in the coil. Put the mouthpiece back on and that's it!

What's in the box?

1 x Revvo Tank

2 x Revvo Coils

1 x Replacement Glass

10 x Spare O-Rings

1 x Protective Cap

Compatible only with Aspire Cleito 120

NOT COMPATIBLE with other tanks in the Cleito series.

Powered by your choice of either a 18650 or 21700 vape battery (sold separately) it's capable of a 100W max output.

The Deco Mod is equipped with multiple output modes, including: Variable Wattage, Variable Voltage and Bypass mode.

Thanks to its single-battery design, the Deco retains a sleek look, so you can take it with you wherever you go. It still finds room to fit an advanced chipset giving you access to multiple output modes, as well as inbuilt safety protections. Modes on offer include classic Variable Wattage, Variable Voltage and Bypass. The CPS (Customisable Power Setting) mode gives you the option of programming your ideal vape.

A crystal clear 0.87inch OLED screen displays all of the vaping data that you need, including wattage and battery levels. Navigate through the menus easily with the Deco's operation buttons.

In The Box

1 x Deco Mod (Battery Not Included)

1 x 18650 Adaptor Preinstalled

1 x Type-C Cable

1 x User Manual

Compatible only with Aspire Cleito 120

NOT COMPATIBLE with other tanks in the Cleito series.

Small, compact and full of features. The Reax Mini holds 6 Pre-Set power settings which of course includes the bypass mode. The mod will auto read the coil and switch the power to a recommended setting, but you can select your own. If the coil reads below 1.0ohm the device will enable bypass for you. The power modes are 8w, 10w, 12w, 14w and 16w.

The Tigon Tank offers leak free filling and is compatible with 2 different coils - 1.2ohm for MTL and 0.4ohm for Sub ohm. In addition to that, there are two variants of airflow to suit both styles of vaping.

Being just a bit shorter than the iPhone 5s, the Aspire PockeX is the ultimate pocket All-in-One (AIO) device. Packed with a 0.6Ω U-Tech coil, the PockeX is a sub-ohm device designed for mouth-to-lung use. The PockeX has a wider drip-tip and larger top-airflow allowing for increased vapor production.

The device has a 2ml tank built into the unit which is leak resistant and very easy to fill and use. Available in 6 attractive colours.

The airflow is set in place to give the perfect draw required for these coils.

If you need a stealthy sidekick to your current setup or are just starting out then look no further than the Pockex!